Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD
Description
This Delock Mobile Rack is designed for external or internal connection of a 2.5″ SATA HDD. Insert the HDD directly into the frame and connect it either externally to a Power Over eSATA port with the help of an optional cable, or internally to SATA. The dimension of the frame complies to a standard 3.5″ HDD. Thus you can install the frame into a 3.5″ slot as well as into a 5.25″ mobile rack.
Technical details
- Connectors:
outside: 1 x SATA 22 pin plug
inside: 1 x SATA 22 pin receptacle (NSS connector) - Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD - Data transfer rate up to 6 Gb/s
- Possible applications:
1. internally in a 3.5″ bay
2. inside a 5.25″ mobile rack
3. externally over eSATAp (cable optional) - Hot Swap
- With special SATA NSS connector inside to protect the SATA connector of the HDD from wear at each change
- Optional HDD fan (mounting holes on the bottom side of mobile rack)
- OS independent, no driver installation necessary
System requirements
- For external using:
PC or laptop with a free Power Over eSATA port (optional eSATAp cable item 84396 / 84432) - For internal using:
1 SATA data cable
PC with a free SATA port
Power supply with a free SATA power connector
Package content
- Mobile Rack
- 1 x 2.5″ hard drive protective film
- Screws
- User manual
Package
- Retail Box
25.01.2023
Datenblatt
25.01.2023
Data sheet
25.01.2023
Dane produktu
25.01.2023
Popis produktu
25.01.2023
Feuille de données
25.01.2023
Hoja de datos
25.01.2023
Datablad
25.01.2023
Adatlap
25.01.2023
Kataloški list
25.01.2023
Φύλλο δεδομένων
25.01.2023
Scheda tecnica
25.01.2023
Fișă cu date
16.06.2022
CE - Declaration of conformity
248.35 kB
My Samsung SSD won't be detected, how do I have to change my system settings?
Please check your BIOS settings.
Please adjust your configuration as follows (as far as those menu items are available, which might not be the case with some older motherboard models):
1. AHCI Mode enabled
2. HotSwap Function enabled
3. SSD Mode enabled
4. Hard Disk S.M.A.R.T enabled
Please adjust your configuration as follows (as far as those menu items are available, which might not be the case with some older motherboard models):
1. AHCI Mode enabled
2. HotSwap Function enabled
3. SSD Mode enabled
4. Hard Disk S.M.A.R.T enabled
Optional accessory
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Delock 5.25″ Installation Frame for 1 x 3.5″
Item No. 18267
Delock Cable Power Over eSATA > SATA 22 pin 0.5 m
Item No. 84396
Delock Cable eSATAp > SATA 22pin retractable
Item No. 84432